Settings in BIOS Setup
Menu Server
48
A26361-D970-Z120-3-7619
SE Communication
Requirement:
Enabled
must be set in the field
Server Management
.
Permits communication between server and SE via the communication bus (CAN-
BUS). If
SE Communication
is
Enabled
, a check is made at system start whether all
SEs are present. For this purpose, the number of SEs attached to the server is
specified in
Number of connected SE
. In addition, when the server is switched on, all
SEs within the group are enabled via the communication bus.
Enabled
Communication via the communication bus is enabled.
Disabled
Communication with the SE via the communication bus is not
possible (default entry). The SEs are not enabled with the server.
Group number
Specifies the group number for SE and server. Communication between SEs and
servers is possible only within a group.
0 to 9
Group number (default entry = 0).
i
The group number of the SE is set using the rotary switches on the control
board in the SE (see SE Operating Manual).
Local Server ID
Specifies the device ID of the server within the group. Within a group each device
must have it's own device ID.
0 to 99
Device ID of the server (default entry 1).
If possible, use only a device ID from 0 to 9 for the server. With this setting you
will get better performance.
Number of connected SE
Specifies the number of SEs connected at the server. At system start a check is
made whether all SEs of the group are present.
0 to 16
Number of SEs (default entry 0).
Содержание D970
