Siemens Healthcare DCA Vantage, Руководство оператора, Страница: 66 / 164

DCA Vantage Operator’s Guide 65
Op
era
ting t
h
e Syst
em
5. To lockout patient tests from a remote computer, select
Remote Patient
Test Lockout
.
6. To save the test lockout setting, select
Save
.
System Settings Wizard
Use the System Settings Wizard screen to configure the System Settings
Wizard to run the next time you turn the system on.
Setting the System Settings Wizard to run
1. At the System Settings menu, select
Additional Settings
.
The Additional Settings menu displays.
2. At the Additional Settings menu, select
General
.
The General menu displays.
3. Select
Settings Wizard
.
The System Settings Wizard screen displays.
4. To run the wizard the next time you turn the system on, select
Run System
Settings Wizard at Next Power on
.
5. To save this setting, select
Save
.
Deleting Patient and Control Test Data
Use the Storage Mode screen to specify how to delete patient and control test
data from the system. You can select to automatically delete tests based on a
first in, first out basis, or you can manually delete a test.
1. At the System Settings menu, select
Additional Settings
.
The Additional Settings menu displays.
2. At the Additional Settings menu, select
General
.
The General menu displays.
3. Select
Storage Mode
.
The Data Storage Mode screen displays.
4. To automatically delete patient and control test data on a first in, first out
basis, select
Automatic Deletion (First In, First Out)
.
5. To manually delete patient and control test data, select
Manual Deletion
.
6. To save the storage mode, select
Save
.
Saving Data and Settings
The Save Data and Settings screen instructs you to insert the storage device
into the Universal Serial Bus (USB) port. The entire database is copied to the
device.