Siel Soleil SPX 200K страница 9 Скачать руководство пользователя

Страница: 9 / 77

IV431E REV. 00 Issued: 2020/11/16 User Manual Soleil SPX 200K-250K

Pag. 7 of 76 +FR

Safety Description

This chapter mainly describes the safety announcements. Prior to performing any work on the device,

please read the user manual carefully, follow the operation and installation instructions and observe all

danger, warning and safety information.

1.1 Safety Announcements

This section mainly describes the safety announcements when operation and maintenance. For details,

please refer to safety description in relevant chapters.

Before operation, please read the announcements and operation instructions in this section carefully to

avoid accident.

The promptings in the user manual, such as "Danger", "Warning", "Caution", etc. don't include all

safety announcements. They are just only the supplement of safety announcements when operation.

Any device damage caused by violating the general safety operation requirements or safety standards
of design, production, and usage will be out of SIEL's warranty range.

1.1.1 Use Announcements

Don't touch terminals or conductors that connected with grid to avoid lethal risk

Содержание Soleil SPX 200K














































































Результаты поиска

Содержание Soleil SPX 200K

Отзывы:

Похожие инструкции для Soleil SPX 200K

Бренды по названию

Популярные бренды

Siel Soleil SPX 200K, Руководство пользователя

Результаты поиска

Содержание Soleil SPX 200K

Отзывы:

Похожие инструкции для Soleil SPX 200K

Бренды по названию

Популярные бренды