Siel Soleil SPX 200K, Руководство пользователя

Страница: 11 / 77

IV431E REV. 00 Issued: 2020/11/16 User Manual Soleil SPX 200K-250K Pag. 9 of 76 +FR
There exists dangerous voltage between the positive and negative of PV string!
When installing the device, make sure that the connection between inverter and PV string has been
disconnected completely. And set warning mark in the disconnected position to avoid reconnecting.
1.1.3 ESD Protection
To prevent human electrostatic damaging sensitive components (such as circuit board), make sure that
you wear a anti-static wrist strap before touching sensitive components, and the other end is well
grounded.
1.1.4 Grounding Requirements
High leakage risk! The inverter must be grounded before wiring. The grounding terminal must be
connected to ground, or, there will be the risk of electric shock when touching the inverter.
l When installing, the inverter must be grounded first. When dismantling, the grounding wire must
be removed at last;
l Don't damage the grounding conductor;
l The inverter must be connected to protection grounding permanently.
l Before operation, check the electrical connection to ensure the inverter is grounded reliably.
1.1.5 Moistureproof Protection
Moisture invasion may cause inverter damage!
Observe the following items to ensure the inverter works normally.
l
When the air humidity is more than 95%, don't open the door of the inverter;
l
In the wet or damp weather, don't open the door of the inverter to maintain or repair.