IV404E Rev.000 SIEL S.p.A.
Issue date: 2017-06-05 Pag. 12 di 90 + FR
1
Insert the forks of the fork-lift truck in the lower part of the device, from the front or back, and
ensure that they stick out about 30 cm on the other side.
If a transpallet is used, raise the device only as much as is strictly necessary.
2
Secure the device to the transpallet or fork-lift before moving it.
Risk of overturning
In order to avoid the risk of the device overturning, ensure that it is firmly secured to the
transpallet or fork-lift truck by means of appropriate ropes before moving it.
When being moved the cabinet should be handled with care; knocks or drops can damage it. Once in
position, remove the packaging carefully in order not to scratch the device.
The packaging should be removed as follows:
1.
Cut the bands
2.
Slide away the carton from above.
3.
Remove the screws securing the cabinet to the wooden base.
4.
If using a transpallet, remove the device from the pallet and set it on the floor, using
the same precautions as set out in the section on Handling.
2.
Installation environment
The SAFEPOWER EVO HFT and the battery cabinet have been designed for indoor installation. The choice
of premises for installation should comply with the points set out below.
