Original operating instructions
MSA400
03.2015
13
Programming
Infrared remote control
Teach in group
Important:
The supplied infrared remote control is taught-in to group 1 by default.
1. Press the
Prog
button; the LED flashes green.
2. Press and hold the operating push button for approx. 5 seconds until a short acoustic signal sounds 2 times in succession.
3. Release the operating push button; the LED flashes red.
4. Within 10 seconds, press the desired button (button
1
-
5
) on the infrared remote control for the new group.
5. A short acoustic tone sounds. The infrared remote control is now taught-in to the new group; this group can now be
operated using this infrared emote control.
Delete group
1. Press the
Prog
button; the LED flashes green.
2. Press and hold the operating push button for approx. 5 seconds until a short acoustic signal sounds 2 times in succession.
3. Release the operating push button; the LED flashes red.
4. Within 10 seconds, press the button (button
1
-
5
) for the group to be deleted on the infrared remote control.
5. A long acoustic tone sounds. The group has been deleted from the infrared remote control; this group can no longer be
operating using this infrared remote control.
1.
2.
3.
4.
5.
ca. 5 Sek.
ca. 10 Sek.
BEEP
1x
BEEP
2x
BEEP
1x
Delete all groups
1. Press the
Prog
button; the LED flashes green.
2. Press and hold the operating push button for approx. 5 seconds until a short acoustic signal sounds 2 times in succession.
3. Release the operating push button; the LED flashes red.
4. Within 10 seconds, press and hold the operating push button for another 5 seconds until an acoustic signal sounds 2 times in succession.
5. Release the operating push button.
6. A long acoustic tone sounds. All groups have been deleted from the infrared remote control; no elements can be
operated with this infrared remote control.
1.
2.
3.
4.
6.
ca. 5 Sek.
BEEP
1x
BEEP
2x
ca. 5 Sek.
BEEP
1x
BEEP
2x
ca. 10 Sek.
BEEP
1x
