manualshive.com logo in svg

Siegenia MHS400 smart, Руководство по сборке

Поделиться
Скачать
Siegenia MHS400 smart Скачать руководство пользователя страница 30

28

Last update: 17.12.2014

MHS400

Assembly instructions

Fixing and e-connection of the lift drive HA on the lift & slide sash

Screw connections and e-connection on the drive unit HA

• Attach the drive unit of the lift drive HA to the fixing plate and fix in place with 

M5 x 10 mm

 screws and washers (included 

in scope of delivery) (Fig. 1).

• Insert the plug at the end of the flat ribbon cable into the plug socket (on plate) of the drive unit (Fig. 2).

Attaching and screwing on the cover caps HA

• Unscrew the two screws in the centre of the drive unit, then set the top half of the cover cap HA down on the fixing plate HA 

and carefully screw tight to the drive unit with the two screws, taking care not to damage the thread (Fig. 3).

• Insert the square nut into the insert pocket at the bottom of the drive unit (Fig. 4).

• Set the bottom half of the cover cap HA down on the fixing plate HA and slide into the top half of the cover cap HA. Next, fix 

the countersunk bolt 

M5 x 16 mm

 (included in scope of delivery) to the drive unit with the square nut (Fig. 5).

Содержание MHS400 smart

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды