manualshive.com logo in svg

Siegenia MHS400 smart, Руководство по сборке

Поделиться
Скачать
Siegenia MHS400 smart Скачать руководство пользователя страница 20

18

Last update: 17.12.2014

MHS400

Assembly instructions

Option B — Concealed fitting of mains cable

If the customer is responsible for the concealed fitting of the mains cable for the slide drive SA and the connection of the slide 
drive SA (in the power supply for scheme A, in the 5-pin socket for scheme C), this work must be carried out by a 

qualified 

electrician

. In the case of mains cable fitting for lift & slide elements which have not yet been installed (e.g. new build and 

renovation projects), a flexible cable (5 x 1.5 mm

2

 incl. connection) for wall and key switches must be provided by the cus-

tomer and fed concealed through the top section of the lift & slide frame (Fig. 3).

3

Drilled holes for the cable inlet and outlet (each approx. Ø 10 mm) must be made for this purpose, with the centre of each 
hole being positioned approx. 7 mm away from the inside frame edge (Fig. 4). 

All-pole safety isolation

 is required if the 

customer is fitting the mains cable. The isolated end of the mains cable must be located inside the power supply housing 
(scheme A) or 5-pin socket (scheme C). The connection to the slide drive is made in accordance with the wiring diagram (see 
page 33 and 38). In the mounting angle for the slide drive SA, there is a sufficiently dimensioned recess for the cable outlet 
on the lift & slide frame profile for scheme A (Fig. 5). The mounting angle for scheme C does not have a recess for the cable 
outlet (Fig. 6). Concealed mains cable fitting to the slide drive SA is through the top edge of the frame on the locking side.

5

5

6

4

Y

7 mm

Bottom edge of lift & slide frame (without cover)

Dimension Y = 15 mm for timber and PVC elements

Dimension Y = central in relation to hollow section in the case of 

Frame

inside edge

Mains cable outlet Ø 10 mm

(drill and deburr)

Mains cable outlet Ø 10 mm

(drill and deburr)

Recess in

mounting angle

Mains cable

inlet

Ø 10

 mm

Mains cable

inlet

Ø 10

 mm

Scheme A

Scheme C

For information about concealed mains cable fitting and connection, see page 33 and 38.

Содержание MHS400 smart

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды