20
MSA400 smart
Installation and operating instructions
05.2017
9. Operation
9.1 Opening the sliding sash
›
When the sliding sash is closed and locked, press the operator push button once.
›
The sliding sash is unlocked and opens; the LED lights up green.
1 x
9.2 Stopping the sliding sash during travel – OPEN or CLOSE direction
›
While the sliding sash is opening, press the operator push button once.
›
The sliding sash stops.
1 x
9.3 Opening the sliding sash to the intermediate position
Note:
The desired intermediate position must be programmed on the MSA400 smart system before carrying out this
function – see . “Teach in intermediate position” on 22.
›
With the sliding sash closed, press and hold the operator push button for approx. 2 seconds until a short acoustic signal
sounds once.
›
The sliding sash opens up to the intermediate position; the LED lights up green.
ca. 2 Sek.
BEEP
1x
