10
MSA400 smart
Installation and operating instructions
05.2017
7.3 Information about mains cable running
Important information for safety and assembly
The fitting of the mains cable is determined by the prevailing conditions on site. There are two assembly options:
Assembly option 1 – surface-mounted mains cable running
The MSA400 smart system is delivered as standard with a mains cable. The cable outlet for scheme A is always at the top of
the slide drive SA on the locking side (Fig. 1); for scheme C, it can be located on the outside of the slide drive SA on either the
left-hand side or the right-hand side. A notch for the cable outlet must be made on the cover cap SA of the cover profile SA
(see Fig. 2). A suitable mains socket must be located near the cable outlet. It is recommended to route the mains cable
through an appropriate installation duct.
1
2
