Installation and operating instructions
MSA400 smart
05.2017
13
7.5 Assembly of the slide drive SA
7.5.1 Horizontal positioning of the slide drive SA
When measuring the RIB (inside frame width), take into account whether the frame profile is being used with or without a
cover. With a cover, the inside frame edge is offset inwards and must be taken into account when measuring the RIB. The
offset specified here of 2 mm* corresponds to the material thickness of the side cover cap SA (optional).
Option A — Frame profile without cover
Position slide drive SA offset from inside frame edge by 2 mm* (see Fig. A)
2 mm*
2 mm*
2 mm*
A
Fig. for positioning DIN left (DIN right is a mirror image)
Inside frame edge
slide drive SA
Cover cap SA
Cowl length
External edge
mounting angle
Inside frame edge
Option B — Frame profile with cover
On a frame profile with cover, the inside frame edge is not visible through the cover. The slide drive SA must be positioned
offset from the inside frame edge by 2 mm* (see Fig. B). To achieve this, the distance from the inside frame edge to the
external edge of the cover must be measured out before positioning the slide drive SA.
2 mm*
2 mm*
2 mm*
B
Fig. for positioning DIN left (DIN right is a mirror image)
Inside frame edge
slide drive SA
Cover cap SA
Cowl length
External edge
mounting angle
Inside frame edge
Cover
Cover
External edge
Cover
