Original operating instructions
AEROMAT VT WRG 1100
10.2018
23
13. Rectification of malfunctions
In case of a malfunction, do not open the device or try to repair it under any circumstances.
If the problem is not listed in the table below, please contact your installation firm or SIEGENIA directly: Tel. +49 271
3931-0
Problem
Possible cause
Solution
AEROMAT VT WRG 1100 shows
no reaction when button is
pressed
No power supply
Check power supply
Wiring wrong/defective or cable
defective
Have the wiring checked by a qualified electrici-
an
Power supply defective
Have the supply voltage checked by a qualified
electrician
AEROMAT VT WRG 1100 smart
does not respond to smartpho-
nes/tablets
No WLAN connection to the
router of the home network
Restart WLAN router of the home network
No WLAN connection to the
smartphone/tablet
Restart smartphone/tablet
No WLAN connection to the
AEROMAT VT WRG 1100 smart
Reset AEROMAT VT WRG 1100 smart:
1. Press membrane key 3 times briefly in
succession
2. Then immediately press and hold the membra-
ne key once (for approx. 4 seconds)
3. The AEROMAT VT WRG 1100 smart has
been reset to the factory settings.
13.1 SIEGENIA Comfort app
You will find detailed operating information as well as information on how to rectify disturbances on the SIEGENIA Smartho-
me Internet page.
https//smarthome.siegenia.com
14. Accessories
Designation
Contents
Material number
Filter set AEROMAT VT WRG 1100
1x outside air filter F7
1x exhaust air filter G3
1x retaining spring
L4270060-093010
Filter set NOx filter F7
(nitrogen dioxide, fine dust, pollen)
1x outside air filter NOx F7
1x exhaust air filter G3
1x retaining spring
L4270090-099010
Switch UP type:VT WHITE
1x series switch Type VT
131322
