16
AEROMAT VT WRG 1100
Original operating instructions
10.2018
11.2.2 Adjustment of the blower level (using the external switch)
• By pressing the external switch, you can activate the required blower levels and automatic mode directly (without
relaying).
•
Attention!
If the membrane key is pressed when an external switch is installed, the next blower level will be activated
(for switching sequence see page 15). Pressing the external switch again takes you back to the required blower level
or automatic mode.
• The automatic mode is only available in designs with sensors
(AEROMAT VT WRG 1100 Var. 2 and Var. 4).
• Following a power failure, the AEROMAT VT WRG 1100 switches to the last level to be used (sensor calibration is
performed first in units with sensors, see page 14).
AEROMAT VT WRG 1100 − Var. 1 and Var. 3 (without sensors)
Recommendation: use a 3-stage rotary switch provided onsite.
0
1
2
3
0
1
2
3
0
1
2
3
0
1
2
3
Blower level 0
Blower level 1
Blower level 2
(Power level)
AEROMAT VT WRG 1100 − Var. 2 and Var. 4 (with sensors)
Recommendation: use a changeover switch in combination with a 3-stage rotary switch provided onsite.
Auto
Manuell
0
1
2
3
0
1
2
3
Auto
Manuell
Auto
Manuell
0
1
2
3
Auto
Manuell
0
1
2
3
Auto
Manuell
0
1
2
3
Blower level 0
Blower level 1
Blower level 2
Automatic
(Power level)
AEROMAT VT WRG 1100 − all versions
Recommendation: use the SIEGENIA type VT series switch („14. Accessories“ see page 23)
0
0
1
2
-Au-
-to-
0
0
1
2
-Au-
-to-
0
0
1
2
-Au-
-to-
0
0
1
2
-Au-
-to-
Blower level 0
Blower level 1
Blower level 2
Automatic*
*only with AEROMAT VT WRG 1100 Var. 2 and Var. 4 (with sensors)
