sidhil Solite UK, Инструкция по эксплуатации

Страница: 16 / 40

16
8.7 Checking the Bed
The bed is now fully assembled. Before the bed is put into use ensure the bed is
correctly assembled by carrying out the following checks:
• Are the locking collars on the corners of the bed correctly orientated in the
locked position (no visible warning triangles)?
• Are the 6 mattress platform and 2 leg extension hand-wheels tight?
• Has all packaging been removed, e.g. cable ties / hook and loop tape securing the
platform sections?
• Are the cables free of all moving parts of the bed and is there sufficient slack in the
cables to allow for movement?
• Is the bed clear of obstructions?
• Have the 2 clevis pins been passed through the bed’s central joint and secured
with ‘R’ clips?
• Has a risk assessment been performed on the suitability of the bed for the user?
8.6 Stowing the Transport Stands
The bed comes complete with an integral transport stand and storage brackets.
• Raise the bed to its full height.
• Holding one transport stand turn it so the words ‘this side in’ face upwards.
• Slide the stand into the tubes positioned under the backrest section, push the
spring clip down and push the stand past until the clip springs back locking the
transport stand in position.
• Repeat the procedure for the remaining transport stand.
Spring clip