sidhil Solite UK, Инструкция по эксплуатации

Страница: 13 / 40

13
8.2 Assembling the Bed
• Whilst supporting one of the bed ends against
a wall, lift one of the mattress platform halves
and hook into the bed end. Turn the locking
collars into their locked position (warning
triangle not visible). When turning the collar to
the locked position it will rise then fall, this is
the self locking mechanism engaging.
Note: If
this action is being undertaken by a single
person Sidhil recommend that the castors
are braked before assembly commences.
• Repeat for the remaining bed end and mattress
platform half.
• Release the brakes on the castors.
• Bring both halves of the bed together and align
each section so that the spigots in the backrest
section locate into the open tube ends in the
leg section. Pull the two sections together and
tighten the 2 hand wheels.
• Place the clevis pins through the tube with the
head of the pin on the outside of the bed. Place
the plastic spacer over the end of the pins and
insert the ‘R’ clips in from the top of the bed
through the hole in the pin.
• The bed must never be used with the hand wheels loose or if missing.
• The bed must never be used with the locking collars in the unlocked
position or if missing.
If the bed has been supplied with tie wraps / hook and loop tape (or similar)
securing any of the sections in place ensure they are removed prior to
operation.
Spigot
Caution
Warning