Side-Power S-linkControl Panel PJC221, Руководство пользователя

Страница: 11 / 28

11
3059 10 2019
-
PJC 221 & 222
AC System - PDC 301 Setup
EN
MC_0096
PDC 301
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a
conventional thruster system. In a system with two bow or stern
thrusters (i.e a catamaran), use BOW or STERN for port thruster,
BOW-STB or STERN-STB for starboard thruster.
(NB: If the boat has Side-Power stabilizer and AC or DC thrusters the thruster location should
be set as BOW-STB or STERN-STB. This so the hydraulic controller are shown at the left side in
display and thruster(s) at the right side of the display.)
Direction
Values: Normal (default)/Inverted
Switches between Normal and Inverted
running direction for the thruster.
Function
Values: SAC (default), SRAC
Setup the control unit behavior.
-SAC: Tunnel speed thruster
-SRAC: SAC with SR150000 retract controller. SR150000 must be set as SRHP/SRAC.
Max output
Values: 50% to 100% (Default 100%)
Set the maximum output thrust of PHC-301 in percent.
PDC-301 will scale the input signal to this value.
7.0
7.1
7.2
7.3
7.4
PDC 101
(SAC Controller) (This device is not able to edit. Pre-setup from factory.)
PDC101 must be setup by authorized personnel.
Firmware version and serial number is Not Available (NA).
Location
Values: BOW/STERN/BOW-STB/STERN-STB
BOW or STERN in a conventional thruster system.
In a system with two bow or stern thrusters (i.e a catamaran),
BOW and STERN is port thruster, BOW-STB and STERN-STB
is starboard thruster.
(NB: If the boat has Side-Power stabilizer and AC or DC thrusters the thruster location should be set
as BOW-STB or STERN-STB. This so the hydraulic controller are shown at the left side in display and
thruster(s) at the right side of the display.)
Direction
Values: NA (Not Available)
AC System - PDC 101 Setup
AC System - PDC 201 Setup
EN
EN
MC_0096
MC_0096
PDC 201
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a conven tional thruster system. In a system
with two bow or stern thrusters (i.e a catamaran), use BOW or STERN for port thruster, BOW-STB or
STERN-STB for starboard thruster.
(NB: If the boat has Side-Power stabilizer and AC or DC thrusters the thruster location should
be set as BOW-STB or STERN-STB. This so the hydraulic controller are shown at the left side in
display and thruster(s) at the right side of the display.)
Direction
Values: Normal (default)/Inverted
Switches between Normal and Inverted
running direction for the thruster.