13
3059
10
2019
-
PJC 221 & 222
DC System - RCRS 1 & RCRS 2 Setup
DC System - MSI8730 Setup
DC System - ESI 1 & GW 1 Setup
EN
EN
EN
MC_0097
MC_0097
MC_0097
ESI-1 (External Single Interface)
GW-1 (Gateway)
This devices will only show fi rmware version and serial number at the button.
RCRS 1 & RCRS 2
BOW/STERN Thrust
Values: 0-100% (Default 75%)
Set the amount of thrust given by the remote control.
In a bow/stern confi guration, try to balance the thrust so that the boat moves straight sideways when both
thrusters are operated simultanously with input from the remote only.
MSI8730
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a conventional thruster system. In a system
with two bow or stern thrusters (i.e a catamaran), use BOW or STERN for port thruster, BOW-STB or
STERN-STB for starboard thruster.
Thrust
Values: 0-100% (Default 70%)
Set the amount of thrust given by the remote control. In a bow/stern confi guration, try to balance the
thrust so that the boat moves straight sideways when both thrusters are operated simultanously with
input from the remote only.
10.0
10.1
11.0
11.1
11.2
12.0
DC System - Automatic Main Switch Setup
DC System - PPC, SR150000, SR61242 Setup
EN
EN
MC_0097
MC_0097
Main Switch
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a conventional thruster system. In a system
with two bow or stern thrusters (i.e a catamaran), use BOW or STERN for port thruster, BOW-STB or
STERN-STB for starboard thruster.
(NB: If the boat has Side-Power stabilizer and AC or DC thrusters the thruster location should
be set as BOW-STB or STERN-STB. This so the hydraulic controller are shown at the left side in
display and thruster(s) at the right side of the display.)
PPC - DC Speed Controller PPC520/ PPC820/ PPC840/ PPC800
SR150000 - Control unit for SRV80/SRV100/SRV130/SRV170/SRV210/SRH
SR61242 - Control unit for SR80/SR100
Location
Values: BOW/STERN/BOW-STB/STERN-STB
Set the location for selected device. Use BOW or STERN in a conventional thruster system. In a system
with two bow or stern thrusters (i.e a catamaran), use BOW or STERN for port thruster, BOW-STB or
STERN-STB for starboard thruster.
(NB: If the boat has Side-Power stabilizer and AC or DC thrusters the thruster location should
be set as BOW-STB or STERN-STB. This so the hydraulic controller are shown at the left side in
display and thruster(s) at the right side of the display.)
Direction
Values: Normal (default)/Inverted
Switches between Normal and Inverted running direction for the thruster
Function
Values: SR(V/L) ON/OFF, SRP, SRVP/SRLP, SEP, SRHP
Setup the control unit behaviour
- SR(V) ON/OFF: Retract thruster (SR6 1242 or SR150000) without speed controller (PPC520, PPC820,
PPC800, PHC-024).
(NB: The joystick needs to be operated more than 50% for the thruster to run.)
- SEP: Tunnel speed thruster, PPC without retract.
- SRP: Retract SR61242 with PPC, both devices needs to be set to SRP.
- SRVP/SRLP: Retract SR150000 with PPC, both devices needs to be set to SRVP/SRLP.
- SRHP/SRAC: PHC or SAC with retract SRHP needs the PHC024 or PHC-3 hydraulic controller.
SRAC needs the PDC-301 SAC controller.
PPC
SR150000
SR61242
PHC 024/
PHC-3
PDC-301
SR(V/L ) ON/OFF
x
x
SRP
x
x
SRVP/SRLP
x
x
SEP
x
SRHP/SRAC
x
x
x
Max output
Values: 50%-100%
(this is only for PPC800 from V1.022 and PPC520/820/840 from V1.008)
Set the maximum output thrust of PPC in percent.
PPC will scale the input signal to this value.
Thermo Switch
Values: Disable (default), Enable
(this is only for PPC520/820/840 from V1.016)
Disable or Enables the thermo switch input on the PPC.
(NB: On PPC520/820/840, if the thermo switch input is closed to 0V at power-up then this function
is automatically set to Enable.)
Содержание S-linkControl Panel PJC221
Страница 26: ...26 3059 10 2019 PJC 221 222 MC_0037 Notes EN...
