Photoelectric retro-reflective sensor
Operating instructions
2
Safety notes
■
Read the operating instructions before commissioning.
■
Connection, mounting, and setting may only be performed by trained specialists.
■
Not a safety component in accordance with the EU Machinery Directive.
■
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of the sensor.
3
Correct use
Photoelectric retro-reflective sensor with additional option for the detection of transparent
objects
The WL100-2 is an opto-electronic photoelectric retro-reflective sensor (referred to as "sensor" in
the following) for the optical, non-contact detection of objects, animals, and persons. A reflector
is required for this product to function. If the product is used for any other purpose or modified in
any way, any warranty claim against SICK AG shall become void.
4
Commissioning
1
Adjust the distance between the sensor and the reflector according to the corresponding
diagram (x = sensing range, y = operating reserve).
8017526
| SICK
1
