5
Technical data
NOTE
This chapter contains an extract of the technical data. For full details, see the TMS/
TMM22 product information (8026428).
5.1
Technical data for TMS/TMM22
General parameters
TMS22
TMM22
Number of measuring axes
1
2
Measuring range up to
360°
± 90°
Resolution
≤ 0.03°
≤ 0.015°
Error limits G
typ. 0.25°, max. 0.5°
1)
typ. 0.25°, max. 0.6°
1)
Repeatability standard deviation σ
r
Analog / 0...10 V 30 mV
2)
Analog / 4...20 mA 30 µA
2)
Compensated cross sensitivity
(dual axis)
-
Typ. +/-0.5°, max. +/-0.9°
Temperature coefficient (zero
point)
± 0.03°/K
Limit frequency
2 Hz
Sampling rate
400 Hz
Operating temperature
-40 °C to +80 °C
For UL: Ambient temperature
max. 75 °C , enclosure type 1
Electrical parameters
Supply voltage
12 V DC … 30 V DC
Current consumption
Analog / 010 V < 50 mA @ 24 V
Analog / 4...20 mA < 50 mA (+ I
loop
) @ 24 V
Mechanical parameters
Connection type
Cable, 5-wire, with 5-pin M12 male connector
Cable, 5-wire, with open ends
Enclosure rating
IP66, IP67, IP68, IP69K
Dimensions
38.8 mm x 30 mm x 10.4 mm
1
In accordance with DIN ISO 1319-1, position of the upper and lower error limit depends on the installa‐
tion situation, specified value refers to a symmetrical position, i.e. deviation in upper and lower direction
is the same.
2
In accordance with DIN ISO 55350-13; 68.3% of the measured values are inside the specified area.
5
TECHNICAL DATA
6
O P E R A T I N G I N S T R U C T I O N S | TMS/TMM22
8026576/1EF6/2021-12-13 | SICK
Subject to change without notice
