SICK RFU6 Series, Техническая информация

Страница: 23 / 31

Technical information
RFU6xx FB for
GX Works 2 (PNDP)
Page 23
Error code Brief description Description
[0] = 16#0027
[1] = 16#0000 Invalid Retry value
(ReadTag_Retry) Invalid retry parameter (Read tag).
Valid value range:
Low nibble = [0..7]
High nibble = [0..5]
[0] = 16#0028
[1] = 16#0000 1 > ReadTag_Antenna
> 15 Invalid antenna selection (Read tag).
Valid value range:
[1..15]
[0] = 16#0029
[1] = 16#0000 0 > WriteTag_Bank > 3 Invalid bank parameter (Write tag).
Valid value range:
[0..3]
[0] = 16#002A
[1] = 16#0000 1 > WriteTag_WordCount
> 32 The function block can write a maximum of
32 words (64 bytes) into the tag.
Valid value range
[1..32]
[0] = 16#002B
[1] = 16#0000 Invalid Retry value
(WriteTag_Retry) Invalid retry parameter (Write tag).
Valid value range:
Low nibble = [0..7]
High nibble = [0..5]
[0] = 16#002C
[1] = 16#0000 1 > WriteTag_Antenna
> 15 Invalid antenna selection (Write tag).
Valid value range:
[1..15]
[0] = 16#002D
[1] = 16#0000 Reserved Reserved
[0] = 16#002E
[1] = 16#0000 1 > UII_Length > 16 Invalid length of selected UII.
This error can only occur in Mode 1 (Single-
Tag).
[0] = 16#002F
[1] = 16#0000 WriteTag_StartWord < 0 Invalid start word parameter (Write tag).
[0] = 16#0030
[1] = 16#0000 ReadTag_StartWord < 0 Invalid start word parameter (Read tag).
RdLength = -1 Reading result >
200 Bytes The reading result received is longer than
200 bytes.
Table 6: Error code table