Operating instructions
Chapter
2
RFID Access Management
8018582/2015-11-03
Operating instructions| SICK
9
Subject to change without notice
Safety
2
Safety
This chapter concerns your own safety and the safety of the system operator.
Please read this chapter carefully before you begin working with RFID Access
Management.
2.1
Qualified safety personnel
RFID Access Management must only be mounted, commissioned, and maintained by
properly qualified personnel.
The following qualifications are necessary for the various tasks:
Activities
Qualification
Mounting and
maintenance
•
Practical technical training
•
Knowledge of the current safety regulations in the
workplace
Electrical installation and
replacement
•
Practical electrical training
•
Knowledge of current electrical safety regulations
•
Knowledge of device control and operation in the
particular application concerned (e.g., logistics gate
(lock))
Commissioning, operation,
and configuration
•
Knowledge of the mechanical and electrical parameters
of the access control that relate to operation and use
•
Knowledge of the software and hardware environment
in the particular application
•
Basic knowledge of the Windows operating system
used
•
Basic knowledge of data transmission
•
Basic knowledge of the design and setup (addressing)
of Ethernet connections when connecting the RFID
interrogators to the Ethernet
•
Basic knowledge of how to use an HTML browser
(e.g., Internet Explorer) to access the online help
Tab. 2: Qualified safety personnel
