Chapter
2
Operating instructions
RFID Access Management
14
Operating instructions | SICK
8018582/2015-11-03
Subject to change without notice
Safety
Risks during maintenance and repair work
HAZARD
Disconnect the power to the system
Make sure the power supply for the entire system is disconnected throughout the entire
time that you are carrying out maintenance and repair work.
HAZARD
Risk of injury due to electrical current
Only a qualified electrician or trained person working under the guidance and supervision
of a qualified electrician is permitted to work on electrical systems or equipment and they
must comply with the electrical regulations.
NOTE
Claims under the warranty rendered void
Do not open the housing of the RFID interrogator. The device is sealed.
If the device is opened, any warranty claims against SICK AG will be void.
The cover on the card slot can be removed to insert the microSD card.
2.5
Protection of the environment
RFID Access Management has been designed to minimize its environmental impact.
It consumes very little power.
Always act in an environmentally responsible manner at work. For this reason, please note
the following information regarding disposal.
2.5.1
Power consumption
At full transmitting power, an RFU62x RFID interrogator consumes approx. 8 watts of
power; an RFU63x RFID interrogator approx. 20 watts.
2.5.2
Disposal after final decommissioning
Always dispose of unusable or irreparable devices in an environmentally safe manner in
accordance with the relevant national waste disposal regulations.
Dispose of all electronic assemblies as hazardous waste. The electronic assemblies are
easy to dismantle.
See also section
7.2 Disposal
.
SICK AG does not take back devices that are unusable or irreparable.
Note
