Figure 4: Arrangement with branches and junctions
Arrangement with branches and junctions
If there are branches or junctions, we recommend arranging the tracks as illustrated.
The minimum distance between the tracks is 7 mm.
In addition, we recommend a minimum overlap length of the tracks of at least 10 cm.
At speeds higher than 2 m/s as well as when commissioning via Ethernet, this area
must be increased.
Figure 4 also shows the sign convention of the LCP with the factory settings. (-90 mm ...
+90 mm on the cable side).
5
MOUNTING
16
O P E R A T I N G I N S T R U C T I O N S | OLS10
8022017.10HG/2018-07-18 | SICK
Subject to change without notice
