4
DST2600 User’s Manual
DST2600 is an integrated automatic mains failure control panel equipped with all the devices
and functions needed for such applications, included battery charge maintainer and siren.
Generator currents and voltages measurements are done with true Root Mean Square
method, mains voltages with means value.
Images, drawings and some descriptions in this document can be related to versions of the
device provided with one or more options.
The present document is applicable starting from FW rev. 00.01.
Information about DST2600 firmware revision can be obtained in two different ways::
A label on device identifies the serial number, the installed options and other
information. This label also reports the software revision identified by the writing “FW”
or “SW” followed by a numeric code “0085XXYY” or “0141XXYY”.
When the device is powered, on the multifunction display will appear for about 3
seconds the following message:
SICES s.r.l.
DST2600 revXX.YY
In both cases, XX is a two digit number the identifies the major software version, YY is a two
digit number that identifies the minor software version.
The complete device SW code is EB0220085XXYY or EB0220141XXYY. If the software
revision is 00.06 (or 0.06) the actual code SW is EB02201410006.
Inside this document, a vertical bar on the page right edge highlights some change in the
paragraphs since the previous document version. Change in table fields are highlighted by a
grey background. The list of the changes is in page
ii
.
To improve the product, SICES, during the time, will introduce some changes in the products.
In spite of every effort made to maintain updated the documentation, some new features or
function couldn’t be covered by this document.
In any case, check first for an updated version of the document on our website
if you need technical support, please write to
