Sibel MOLE, Руководство по эксплуатации

Страница: 15 / 19

15
PORTABLE SELECTIVE MICROPROCESSOR METAL DETECTOR MOLE
interference of the two devices, operating close to each
other. In order to do this it is necessary to set up the
working frequencies of the devices maximally different
from each other.
To switch over the language of displayed messages
(Russian/English), it is necessary to switch on the device
keeping pressed the
«SENS» ( «Off») button.
After switching off, the device stores the parameters of
the last setting of the special mode, except LCD
backlight.
O P E R A T I N G M A N U A L
PROBABLE REASON
Replace the storage bat-
tery
Move out the storage
battery for 1 min and
insert it again
Refer to repairing
facility or to the
manufacturer
8.
Technical
maintenance
The device does not
switch on
The device does not
switch on
LEDs of the charger
corpus are not lit
Storage battery is fully dis-
charged
Failure of operation
No power at the main or
charger block is malfunc-
tioning
PROBLEM POSSIBLE REMEDY
fig.45
7.
Troubleshooting
During the whole exploitation period the technical
maintenance of MOLE device should be carried out in
accordance with the present operating manual
requirements.
Technical maintenance of the device presupposes
the complex of measures intended to keep up the
technical condition of the device in the course of its
preparation and exploitation, and also while it is stored
and transported.