Shuttle XPC SN21G5 Скачать руководство пользователя страница 56

Страница: 56 / 65

English

Day of Month Alarm

This item selects the alarm Day of Month.

The choice: 0~31.

Time (hh : mm : ss) Alarm

This item selects the alarm Time.
[hh]

Key in a DEC number: Min=0, Max=23.

[mm/ss]

Key in a DEC number: Min=0, Max=59.

PS2 Keyboard Power ON

When the POWER ON Function is set to PS2 Keyboard, use this item to
set the PS2 keyboard combination that turns on the system.

The choice: Disabled, Password or Hot KEY.

KB Power ON Password

When the POWER ON Function is set to Password, use this item to set the
password.

The choice: Enter.

Hot Key Power ON

When the POWER ON Function is set to Hot Key, use this item to set the
hot key combination that turns on the system.

The choice: Ctrl-F1~F12 or Any key.

PS2 Mouse Power ON

When the POWER ON Function is set to PS2 Mouse, use this item to set
the PS2 mouse combination that turns on the system.

The choice: Disabled or Enabled.

PWRON After PWR-Fail

This item allows you to select power on function when power fail.

The choice: Former-Sts, Off or On.

Содержание XPC SN21G5


































































Результаты поиска

Содержание XPC SN21G5

Отзывы:

Похожие инструкции для XPC SN21G5

Бренды по названию

Популярные бренды

Shuttle XPC SN21G5, Руководство пользователя

Результаты поиска

Содержание XPC SN21G5

Отзывы:

Похожие инструкции для XPC SN21G5

Бренды по названию

Популярные бренды