Shuttle AV49 Скачать руководство пользователя страница 74

Страница: 74 / 85

- 72 -

Max Saving

Max Saving Maximum power management.

HDD Power Down=Allows you to set each mode

individually.
Suspend Mode=1 min.

HDD Power Down

When this item enabled and after the set up time of system inactivity,

the hard disk drive will be powered down while all other devices

remain active.

The choice: Disabled or 1 Min~15 Min.

Suspend Mode

When this item enabled and after the set up time of system inactivity, all

devices except the CPU will be shut off.

The choice: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min,

20 Min, 30 Min, 40 Min, or 1 Hour.

Video Off Option

When enabled, this feature allows the VGA adapter to operate in a

power saving mode.
Always On

Always On

Monitor will remain on during power saving

mode.

Suspend --> Off

Monitor is blanked when the system enters

the Suspend mode.

The choice: Always On , or Suspend ->off.

Video Off Method

This determines the manner in which the monitor is blanked.
V/H SYNC+Blank

V/H SYNC+Blank

V/H SYNC+Blank This selection will cause the system to turn off the
vertical and horizontal synchronization ports
and write blanks to the video buffer.
Blank Screen

Blank Screen

Blank Screen This option only writes blanks to the video buffer.
DPMS Support

DPMS Support

DPMS Support Initial display power management signaling.

The choice: V/H SYNC+Blank, Blank Screen, or DPMS Support.

MODEM Use IRQ

This determines the IRQ which the MODEM can use.

The choice: 3, 4, 5, 7, 9, 10, 11, or N/A.

Содержание AV49






















































































Результаты поиска

Содержание AV49

Отзывы:

Похожие инструкции для AV49

Бренды по названию

Популярные бренды

Shuttle AV49, Руководство пользователя

Результаты поиска

Содержание AV49

Отзывы:

Похожие инструкции для AV49

Бренды по названию

Популярные бренды