Shuttle AV49 Скачать руководство пользователя страница 71

Страница: 71 / 85

- 69 -

Onboard Serial Port1/Port2

Onboard Serial Port1/Port2
Select an address and corresponding interrupt for the first and second

serial ports.

The choice: 3E8/IRQ4, 2E8/IRQ3, 3F8/IRQ4, 2F8/IRQ3,Auto, or

Disabled.

UART Mode Select

This item allows you to select which mode for the Onboard Serial Port 2.

The choice: IrDA or Normal.

UR2 Duplex Mode

This item allows you to selects the IR half/full duplex function.

The choice: Full or Half.

Onboard Parallel Port

This item allows you to determine onboard parallel port controller I/O

address setting.

The choice: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, or Disabled.

Parallel Port Mode

Select an operating mode for the onboard parallel (printer) port. Select

Normal, Compatible, or SPP unless you are certain your hardware and

software both support one of the other available modes.

The choice: SPP, EPP, ECP, or ECP+EPP.

ECP Mode Use DMA

ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.

The choice: 1 or 3.

Game Port Address

Game Port Address
This item selects Game Port Address.

The choice: Disable, 201, or 209.

Midi Port Address

Midi Port Address
This item selects Midi Port Address.

The choice: Disable, 330, or 300.

Midi Port IRQ

Midi Port IRQ
This item selects Midi Port IRQ.

The choice: 5 or 10.

Init Display First

This item allows you to decide to activate PCI Slot or VGA slot first.

The choice: PCI Slot or AGP.

Содержание AV49






















































































Результаты поиска

Содержание AV49

Отзывы:

Похожие инструкции для AV49

Бренды по названию

Популярные бренды

Shuttle AV49, Руководство пользователя

Результаты поиска

Содержание AV49

Отзывы:

Похожие инструкции для AV49

Бренды по названию

Популярные бренды