Shuttle AV49 Скачать руководство пользователя страница 54

Страница: 54 / 85

- 52 -

5 BIOS SETUP

AV49/N BIOS ROM has a built-in Setup program that allows users to modify

the basic system configuration. This information is stored in battery-backed

RAM so that it retains the Setup information even if the system power is

turned off.

The system BIOS is managing and executing a variety of hardware related

functions in the system, including:
System date and time
Hardware execution sequence
Power management functions
Allocation of system resources

5.1 Enter the BIOS

To enter the BIOS (Basic Input / Output System) utility, follow these steps:

Step 1.

Power on the computer, and the system will perform its POST

(Power-On Self Test) routine checks.

Step 2.

Press <Del> key immediately, or at the following message:

Press DEL to enter SETUP, or simultaneously press <Ctrl>,

<Alt>, <Esc> keys

Note 1.

Note 1. If you miss trains of words meationed in step2 (the message disap-

pears before you can respond) and you still wish to enter BIOS

Setup, restart the system and try again by turning the computer OFF

and ON again or by pressing the <RESET> switch located at the

computers front-panel. You may also reboot by simultaneously

pressing the <Ctrl>, <Alt>, <Del> keys.

Note 2.

Note 2. If you do not press the keys in time and system does not boot, the

screen will prompt an error message, and you will be given the

following options:

Press F1 to Continue, DEL to Enter Setup

Step 3.

As you enter the BIOS program, the CMOS Setup Utility will

prompt you the Main Menu, as shown in the next section.

Содержание AV49






















































































Результаты поиска

Содержание AV49

Отзывы:

Похожие инструкции для AV49

Бренды по названию

Популярные бренды

Shuttle AV49, Руководство пользователя

Результаты поиска

Содержание AV49

Отзывы:

Похожие инструкции для AV49

Бренды по названию

Популярные бренды