- 16 -
Step 5.
Mount the Mainboard on the Computer Chassis
1. You may find that there are a lot of different mounting hole positions both on
your computer chassis and on the mainboard. To choose correct mounting
holes, the key point is to keep the back-panel of the mainboard in a close fit
with your system case, as shown below.
2. After deciding on the proper mounting holes, position the studs between the
frame of the chassis and the mainboard. The studs are used to fix the
mainboard and to keep a certain distance between the system chassis and
the mainboard, in order to avoid any electrical shorts between the board and
the metal frame of the chassis. (If your computer case is already equipped
with mounting studs, you will need to tighten screws to attach the
mainboard.)
Note:
Note:
Note:
Note:
Note: In most computer housings, you will be able to find 4 or more attach-
ment points to install mounting studs and then fix the mainboard. If
there aren't enough matching holes, then make sure to install at least 4
mounting studs to ensure proper attachment of the mainboard.
