- 36 -
3.3 System Memory Configuration
AV42 mainboard has three 184-pin DIMM slots that allow you to install from
128MB to 1GB of system memory. Each 184-pin DIMM (Dual In-Line
Memory Module) slot can accommodate 128MB, 256MB, 512MB, and 1GB
of PC2100 compliant 2.5V single or double side 64-bit wide data path DDR
SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note: The total installed memory does not exceed 3GB.
Note:
You need not to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in any available DIMM slots. The total system memory is
calculated by simply adding up the memory in all DIMM slots. After upgrad-
ing, the new system memory value will automatically be computed and dis-
played in "Standard CMOS Setup" of BIOS setup program.
D I M M S l o t
M e m o r y M o d u l e s
M o d u l e
Q u a n t i t y
D I M M 1
1 2 8 M B , 2 5 6 M B , 5 1 2 M , a n d 1 G B 1 8 4 - p i n
2 . 5 V D D R S D R A M D I M M
x 1
D I M M 2
1 2 8 M B , 2 5 6 M B , 5 1 2 M , a n d 1 G B 1 8 4 - p i n
2 . 5 V D D R S D R A M D I M M
x 1
D I M M 3
1 2 8 M B , 2 5 6 M B , 5 1 2 M , a n d 1 G B 1 8 4 - p i n
2 . 5 V D D R S D R A M D I M M
x 1
