- 33 -
F
Other Connectors
ATX Power Supply Connector (ATX1)
This motherboard uses 20-pin standard Pentium 4 ATX power header
(ATX1). Please make sure you plug it in the right direction.
A traditional ATX system remains in the power-off stage when AC power re-
sumes from power failure. However, it is inconvenient for a network server or
workstation if there is not an UPS to execute power-on. Thus, this motherboard
supports an AC Power Auto Recovery function to solve this problem. You may
enable the function, "PWRON After PWR-Fail," in the sub-menu of "Power
Management Setup" within the BIOS setup program.
Note 1:
The ATX power connector is directional and will not go in
unless the guides match perfectly, making sure that pin#1 is
properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into
place to ensure a solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI+5V
standby power and at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher
speed processor installed.
E1
ATX1
A
T
X
1
