- 49 -
The following five items will become selectable if you choose
the "Manual" item.
SDRAM CAS Latency
Ø
The Choice: 3, 2.5, or 2.
Bank Interleave
Ø
The Choice: Disabled, 2 Bank, or 4 Bank.
Precharge to Active(Trp)
Ø
The Choice: 2T or 3T.
Active to Precharge(Tras)
Ø
The Choice: 5T or 6T.
Active to CMD(Trcd)
Ø
The Choice: 2T or 3T.
DRAM Burst Len
This item allows you to select the DRAM burst length.
Ø
The Choice: 4 or 8.
DRAM Command Rate
This item allows you to select the DRAM executed rate.
Ø
The Choice: 2T Command or 1T Command.
APG & P2P Bridge Control
Press <Enter> to enter into the detailed options.
AGP Aperture Size
Select the size of the Accelerated Graphics Port (AGP) aperture. The
aperture is a portion of the PCI memory address range, dedicated to the
graphics memory address space. The host cycles that hit the aperture
range are forwarded to the AGP without any translation.
Ø
The Choice: 256M, 128M, 64M, 32M, 16M, 8M, or 4M.
AGP Mode
This item allows you to select the AGP Mode.
Ø
The Choice: 4X, 2X, or 1X.
AGP Driving Control
This item enables the system to automatically select its output buffer
drive strength, or make it manually selectable by an end-user.
Ø
The Choice: Auto or Manual.
AGP Driving Value
This item enables an end-user to manually select the AGP output buffer
drive strength.
Ø
Key in a HEX number: Min=0000, Max=00FF.
