- 58 -
This category configures how PnP and PCI operate in your system.
Correctly setting up the IRQ and DMA (both PnP and PCI use) assign-
ments will make your system work stably. It is strongly recommended
that only technical users make changes to the default settings.
PNP OS Installed
This item allows you to define if PnP OS is installed.
Ø
The choice:
No or Yes.
Reset Configuration Data
When enabled, any PnP configuration data stored in the BIOS will be
cleared from memory, with new data created.
Ø
The choice:
Disabled or Enabled.
Resource controlled By
@
PnP/PCI Configurations
When stays auto(ESCD), the system will dynamically allocate resources
to PnP devices as they are required. As set to manual, the following line
"IRQ Resources" will become available to you.
Ø
The choice:
Auto(ESCD) or Manual.
IRQ Resources
When the previous item is set to manual, this item allows you to respec-
tively assign an interruptive type for IRQ-3 to IRQ-15.
IRQ-3/4/5/7/9/10/11/12/14/15 assigned to
Ø
The choice:
PCI Device or Reserved.
