41
3.3 System Memory Configuration
The AK12 mainboard has three 168-pin DIMM sockets that allow you to
install from 32MB up to 1.5GB of system memory with PC 100/133 SDRAM
(Synchronous DRAM) and VCM (Virtual Channel Memory) SDRAM. Each
DIMM (Dual In-line Memory Module) socket can accommodate 32MB,
64MB, 128MB, 256MB and 512MB 3.3V single or double side 64 bit wide
data path SDRAM and VCM SDRAM modules.
Install Memory:
Install memory in any or all of the banks and in any combination, shown as
follows :
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You
can check the total system memory value in the BIOS Standard
CMOS Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional
SDRAM and VCM SDRAM modules in available DIMM banks. The total
system memory is calculated by simply adding up the memory in all
DIMM banks. After upgrade, the new system memory value will auto-
matically be computed and displayed by the BIOS Standard CMOS Setup
menu.
DIMM
Socket
Memory Modules
Module
Quantity
DIMM 1
32MB, 64MB, 128MB, 256MB and 512MB
168-pin 3.3V SDRAM and VCM SDRAM DIMM
x 1
DIMM 2
32MB, 64MB, 128MB, 256MB and 512MB
168-pin 3.3V SDRAM and VCM SDRAM DIMM
x 1
DIMM 3
32MB, 64MB, 128MB, 256MB and 512MB
168-pin 3.3V SDRAM and VCM SDRAM DIMM
x 1
