33
POWER LED (PWR LED)
If you get a 3-pin LED in dual color con-
nector, attach the cable from housing's
front panel to the PWR LED header on
board. The LED stays light while the sys-
tem is running ; and it turns to another
color while the system is operating from
normal mode to ACPI mode.
Sleep Switch (SLP SW)
SLP SW header may attach to a 2-pin mo-
mentary switch. Press the SLP SW switch
to force the system into power saving
mode; press it again to resume to normal
operation.
Green LED (GRN LED)
The green LED (GRN LED) indicates that
the system is currently in one of the power
saving mode (Doze/Standby/Suspend).
When the system resumes to normal
operation mode, the green LED will go
off. Attach a 2-pin green LED cable to
GRN LED header.
+
+
+!
Note :
Please notice all LED connectors are directional. If your chassis’s
LED does not light up during running, please simply change to the opposite
direction.
+
+
+
+
PWR LED
SLP SW
GRN LED
RST
SPEAKER
HDD LED
PWR SW
PA
N
EL
1
1
+
+
+
+
PWR LED
SLP SW
GRN LED
RST
SPEAKER
HDD LED
PWR SW
PA
N
EL
1
1
+
+
+
+
PWR LED
SLP SW
GRN LED
RST
SPEAKER
HDD LED
PWR SW
PA
N
EL
1
1
