- 61 -
Primary Master / Slave PIO
In this item, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default
setting for on board Primary Master / Slave PIO timing.
Ø
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Secondary Master / Slave PIO
In this item, there are five modes defined in manual mode and one
automatic mode. There are
0, 1, 2, 3, 4,
and
AUTO
is the default
setting for on board Secondary Master / Slave PIO timing.
Ø
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary Master / Slave UDMA
On this mainboard, AK10 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to 33/
66MB/sec.
Auto
is the default setting for on board Primary Master /
Slave UltraDMA 33/66.
Note : Your hard disk drive must also support UDMA for this feature
to work.
Ø
The choice: Auto, Disabled.
Secondary Master / Slave UDMA
On this mainboard, AK10 PCIset improves IDE transfer rate using Bus
Master UltraDMA 33/66 IDE which can handle data transfer up to 33/
66MB/sec.
Auto
is the default settings for on board Secondary Master /
Slave
UltraDMA 33/66
.
Note : Your hard disk drive must also support UDMA for this feature
to work.
Ø
The choice: Auto, Disabled.
Init Display First
This item is used to determine initial device when system is powered
on.
Ø
The choice: AGP, PCI Slot.
IDE HDD Block Mode
This item is used to set IDE HDD Block Mode. If your IDE Hard Disk
supports block mode, then you can enable this function to speed up
the HDD access time. If not, please disable this function to avoid HDD
access error.
Ø
The choice: Enabled, Disabled.
