- 9 -
-
-
ATX Form Factor
System board conforms to the ATX specification.
Board dimension: 304mm × 244mm
-
-
Advanced Features
Ø
Dual Function Power Button -
The system can be in one of two states;
one is Suspend mode and the other is Soft-Off mode. Pushing the power
button for less than 4 seconds places the system into Suspend mode.
When the power button is pressed for longer than 4 seconds, the system
enters the Soft-Off mode.
Ø
Wake-on-LAN (WOL) -
The onboard WOL connector can be attached to
a network card that supports this function to wake up the system via LAN.
Ø
Modem Ring Power-On
- The system can be powered on automatically
by the activation of modem ring.
-
-
Other Features
Ø
Hardware Monitoring -
This motherboard implements a hardware moni-
toring system. As you turn on your system, this smart design will continue
to monitor your system's working voltage, fan status and CPU temperature.
If any of these systems's status goes wrong, there will be an alarm through
the VIA Hardware Monitoring Utility to warn the user.
Ø
PC-Doctor Debug LED (Optional)
-
In conjunction with PC Doctor (Op-
tional). The
DR. LED
can easily show what kind of problem you may incur
on your system during assembly. It can clearly indicate whether there is a
component issue or an installed issue by the 8 LEDs on front panel of PC-
Doctor. This helps you quickly self diagnostic your system status.
Ø
Thermal Sensor (Optional)
-
With the increasing performance, the compo-
nents nowadays always generate enormous heat inside the system, such as
CPU, VGA card, HDD, and so on. In the meanwhile, they're the most
important components while we concern about the stability of the system.
The thermal sensor provides a convenient and flexible way of an exten-
sible sensor for users to detect the temperature of any component.
Ø
RAM Power LED
-
This LED indicates there is power which applies to
memory. It is useful to check RAM power during Suspend to RAM. Don
not unplug memory module when this LED is On.
