Shure Incorporated
80/103
◦
◦
◦
◦
◦
◦
◦
◦
Preferences Tab
All preferences apply to each device in the Configuration.
①
Switch Behavior
Customize the switch on each transmitter type.
Toggle (default):
Press and release the button to change the status to Active or Mute.
Push-to-talk:
Hold button to pass audio.
Push-to-mute:
Hold button to mute the audio.
Disabled:
The button does not affect the audio.
②
Initial State from Charger
Assigns the state for the transmitter after it has been removed from the charger:
Active:
On and passing audio to the network.
Mute:
On but the audio is muted.
Standby:
On but in a 'sleep' state with audio muted. Standby conserves battery charge and enables a change to the
transmitter's status from the control software.
Off:
Power is off. A transmitter in this state cannot be remotely controlled by the software.
Note:
These settings only apply to standard mode; transmitters in high efficiency mode are always powered off when removed from the changer.
③
LED Behavior
Set the behavior of the mute/active LED for each transmitter type. Standby mode is always represented with a pulsing red
LED.
Active
Mute
Solid Green*
Solid Red
Solid Red
Flashing Red
