Shure Microflex MXWANI4 Скачать руководство пользователя страница 16

Страница: 16 / 103

Shure Incorporated

16/103

Directional Antennas

The access point contains multiple directional antennas to provide steady, reliable wireless communication with the micro

phones. It sends and receives the RF signal in a cardioid pattern with the greatest sensitivity toward the face of the device. Al

ways aim this side toward the microphone coverage area.

Cardioid RF Pattern

Networked Charger (NCS)

The MXW networked charging station enables battery charging and channel linking from a single location. When a charger is

associated to a group, its channel slots are mapped to access point audio channels. Microphones can then be placed in the

slots to Link to these channels.

Any microphone can recharge in any NCS, regardless of Group association or network connection.

Caution:

When the Link button on an associated charger is pressed, all microphones in the charger are mapped to channels

on an access point. This overrides any previously Linked microphones on those channels.

Model Variations

MXWNCS8

Accepts eight boundary, bodypack, or handheld microphones

or four gooseneck bases

MXWNCS4

Accepts four boundary, bodypack, or handheld microphones

or two gooseneck bases

MXWNCS2

Accepts two boundary, bodypack, or handheld microphones.

MXW8 Gooseneck bases

are not supported

on this charger

Содержание Microflex MXWANI4








































































































Результаты поиска

Содержание Microflex MXWANI4

Отзывы:

Shure Microflex MXWANI4, Руководство пользователя, Страница: 16 / 103

Результаты поиска

Содержание Microflex MXWANI4

Отзывы: