Shure Microflex MXWANI4 Скачать руководство пользователя страница 74

Страница: 74 / 103

Shure Incorporated

74/103

◦

Displays the microphone type.

⑯

Link/Unlink Buttons

For setting up a single audio channel. Links the microphone to the primary or secondary link slot (as selected at the top of

the channel strip).

Link:

Links the microphone from the corresponding charging slot.

Unlink:

Unlinks the microphone from the audio channel.

⑰

Bodypack Mic Options

There are two input sources available on the MXW1 bodypack: the internal, omnidirectional microphone or the external,

TQG input for lavalier or headset microphones. Select the input source preference:

Auto: The internal mic is used until the MXW1 detects a connection at the TQG input. The microphone automatically se

lects the external source whenever available.

Internal: Audio source is always from the internal microphone.

External: Audio source is always from a connected microphone. (Internal mic is off.)

⑱

Return Channels

Monitor the signal level and mute/unmute the audio of the return channel. Disabled in high density mode (HD).

Configuration Tab

①

Group Row

Each row represents a Group in the Configuration. Select an APT and associate chargers and audio output devices to form

each Group.

②

ID Button

Commands the selected device's LEDs to flash for easy identification.

Содержание Microflex MXWANI4








































































































Результаты поиска

Содержание Microflex MXWANI4

Отзывы:

Shure Microflex MXWANI4, Руководство пользователя, Страница: 74 / 103

Результаты поиска

Содержание Microflex MXWANI4

Отзывы: