4
Creating Stereo Mixes
Create stereo mixes using the level and balance controls on the front panel of the AuxPander.
On the front panel, each column corresponds to the input at one of the
IN/OUT
jacks, and each row corresponds to a
stereo output pair. Use the
LEVEL
knobs to add signal to each stereo output pair. Use the
BALANCE
controls to move
signal between the left and right outputs.
Figure 2 shows signal from the AuxPander Channel 1 input (
IN/OUT
1) routed to each stereo output. To add signal
from the Channel 2 input (
IN/OUT
2) to the
STEREO A
outputs, use the
LEVEL
control in the same row (
STEREO A
/
OUTS 1–2) in the second column (2) .
1
2
3
Channel 1
Stereo Outputs or Mono Outs 1–8
FLOW DIAGRAM FOR CHANNEL 1 INPUT
FIGURE 2
