9
F
Insert Assign Switch
The
INSERT ASSIGN
switches route processed signal returning from signal processors or other devices connected to
the AuxPander
INSERT
jacks.
INSERT ASSIGN
INSERT ASSIGN
INSERT ASSIGN
GLOBAL
: Inserted processor affects signal at both the Aux-
Pander and the mixing console.
REMOTE
: Processed signal goes to the mixing console only
(signal going to the AuxPander mix bus remains unprocessed).
LOCAL
: Processed signal goes to the AuxPander only (signal
returned to mixing console is unprocessed).
G
Output Jacks
There are four pairs of impedance-balanced, line-level,
1
/
4
”
OUTPUT
jacks. Create mixes for these outputs using the
front panel
LEVEL
and
BALANCE
knobs.
H
Direct Input Jacks
Connect balanced or unbalanced, line-level audio to the
DIRECT INPUT
jacks. Signals at the
DIRECT INPUT
jacks
operate at unity gain. They sum with the signal at the left (
L/MONO)
and right (
R)
OUTPUT
jacks after the mix bus.
Mono Operation: If you plug a connector into the
L/MONO
jack only, the signal from that connector appears at both
the left (
L/MONO)
and right (
R)
stereo outputs.
Use the direct inputs for signals that do not need to go to the mixing console and can be placed “on top” of the mixes at
the
OUTPUT
jacks. For example, you can put a click track on the stereo mix going to the drummer.
Direct inputs also allow you to expand the number of input channels while keeping the same number of mixed outputs.
For example, connecting the outputs of one AuxPander to the direct inputs of another AuxPander creates a 16 X 8
matrix. Since the direct inputs operate at unity gain, the combined mixes of Inputs 1–8 (the first AuxPander) and Chan-
nels 9–16 (the second AuxPander) arrive at the outputs of the second AuxPander.
NOTE: See page 15 for an example of a 16 X 8 matrix.