5
Additional Input Capabilities
In addition to receiving audio input from mixing console inserts, the AuxPander can also accept standard inputs from
line-level devices, as described below.
Inserts
Plug line-level sources into the
INSERT
jack and set the
INSERT ASSIGN
switch to
REMOTE.
Adjust level and balance
to feed the signal to the stereo outputs.
INSERT ASSIGN
“Half-Normal” Connection (IN/OUT Jack)
You can connect unbalanced line-level outputs to the
IN/OUT
jacks. Insert the
1
/
4
” phone plug halfway into the
IN/OUT
jack until the first “click.” The
INSERT
jacks remain available for inserting processing locally.
1
/
4
” mono phone plug
from line-level output
AuxPander
IN/OUT
jack
First “click”
Direct Inputs
The
DIRECT INPUT
jacks on the back of the AuxPander feed signal directly to the outputs, bypassing the mix bus.
(See Callout H in the next section.)
Daisy Chain Connection for Mono Monitoring
Use this method to add a signal to four mono outputs.
1.
Use the
BALANCE
knobs to pan input from the
IN/OUT
jacks all the way to the left.
2.
Plug a mono input into the
STEREO A DIRECT INPUT L/MONO
jack.
3.
Use a 1/4” phone patch cord to connect all the right outputs (
OUTPUT–R)
outputs to the mono direct inputs
(
DIRECT INPUT–L/MONO)
of the next stereo bus.
4.
Continue the daisy chain as necessary by connecting the right (
R)
STEREO D OUTPUT
jack to a
DIRECT
INPUT
jack of another AuxPander.
1
2
3
4
AuxPander Outputs
Line
Input
AuxPander
Balance Controls
