![background image](http://html1.mh-extra.com/html/shure/adx5d/adx5d_manual_1262628026.webp)
Shure Incorporated
26/33
Headphone Settings
Choose a mode for your 3.5 mm. output depending on which equipment you use with the receiver.
3.5mm Output Settings
Tip
Ring
Sleeve
Balanced/Un
balanced
Max Out
Stereo Sepa
ration
Balanced Sum
audio+
(Rx1-12dB &
Rx2-12dB)
audio-
(Rx1-12dB &
Rx2-12dB)
Ground
Balanced
~ +8.5 dBV
N/A
Balanced Rx2
audio+
(Rx2-6dB)
audio-
(Rx2-6dB)
Ground
Balanced
~ +8.5 dBV
N/A
Balanced
Rx1*
audio+
(Rx1-6dB)
audio-
(Rx1-6dB)
Ground
Balanced
~ +8.5 dBV
N/A
Sum Rx1 +
Rx2
audio+
(Rx1-6dB and
Rx2-6dB)
audio+
(Rx1-6dB and
Rx2-6dB)
Ground
Unbalanced
+8.5 dBV per
channel
N/A
Solo Rx2
audio+ (Rx2)
audio+ (Rx2)
Ground
Unbalanced
+8.5 dBV per
channel
N/A
Solo Rx1
audio+ (Rx1)
audio+ (Rx1)
Ground
Unbalanced
+8.5 dBV per
channel
N/A
Stereo Rx1/
Rx2* (default)
audio+ (Rx1)
audio+ (Rx2)
Ground
Unbalanced
+8.5 dBV per
channel
60 dB (TO BE
CONFIRMED)
*When ADX5D is operating in FD-S with Pre selection chosen, the sum will continue to output the Post FD-S audio.
Firmware
Firmware is embedded software in each component that controls functionality. Installing the latest version of firmware updates
the receiver to incorporate additional features and enhancements. New versions of the firmware can be uploaded and installed
using the Shure Update Utility tool available in Shure Wireless Workbench 6 (WWB6) software. Software is available for down
load from http://www.shure.com.
Firmware Versioning
When you update receiver firmware, update your transmitters to the same firmware version to ensure consistent operation.
The firmware of all devices has the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all devices on the network (in
cluding transmitters), must have the same MAJOR and MINOR firmware version numbers (e.g., 1.2.x).
DRAFT
- REVIEW
ONLY