Shure Incorporated
19/33
◦
◦
◦
◦
◦
◦
The encryption key icon (
) will appear on the display of both the receiver and the transmitter when encryption is enabled.
Trans Mode
Choose between standard and high density transmitter spacing.
Custom Groups
Configure, edit, or load custom frequency groups.
TV Format
Adjust TV bandwidth to match regional standards.
Device ID
Assigning custom names or IDs helps with monitoring and organizing when the receiver is part of a large system. Use the ar
row buttons to select or edit an ID.
ShowLink
SL Mode
Select a ShowLink mode.
SL Current Channel
When ShowLink mode is on, displays the current channel.
SL Direct Config
SL Ch Selection: When in direct mode, choose whether channel selection is automatic or manual.
SL Ch (Manual): Select a ShowLink channel.
SL Ch Mask (Auto): Set automatic channel selection to use or avoid individual channels.
SL Capacity: Displays the number of devices connected to the ShowLink network as well as the total capacity of the net
work.
SL Network Config
SL Test (Rx): See the current ShowLink status as you move around an area.
SL Net ID (Client): See and configure the ShowLink network host ID.
Access Ctrl
View the status of access control (enabled or disabled). If access control is enabled, the access control PIN appears in this
menu. Use Wireless Workbench or other Shure control software to enable or disable access control.
Net Browse
Use the Network Browser utility to view Shure devices on the network.
By Model
Displays all devices on the network.
By FW Version
Displays the installed firmware version of the selected network component.
DRAFT
- REVIEW
ONLY
