Shure Incorporated
17/33
•
•
Note:
Any change to the encryption status on the receiver such as enabling/ disabling encryption or requesting a new encryption key,
requires a sync to send the settings to the transmitter.
Home Screen
The home screen displays the most critical device and channel properties and statuses. From the main home screen, use the
arrow buttons to navigate to the channel home screens. Press O to open the menu selection screen.
To change the information that appears on the device or channel home screens, go to
Device
Configuration
>
Display
>
Dev
Home
Options
or
Ch
Home Options
.
Icons
Battery runtime in hours and minutes or bar display
Displayed when encryption is enabled
Displayed when controls are locked. Icon will flash if access
is attempted to a locked control (power or menu).
ShowLink signal strength displays 0 to 5 bars
Indicates standard transmission mode
Indicates high density transmission mode
Displayed when RF output is muted
Menus and Configuration
The receiver uses a two-tier menu structure to support multiple channels:
Device configuration menu: Items in this menu affect the overall performance of the receiver and apply to all channels
globally.
Channel menus: Each channel has its own menu allowing for independent channel configuration.
Device Configuration Menu
Use the following menu items and parameter settings to configure the receiver at the device level. From the home screen,
press O to see your menu options. Use the arrows to select the menu of your choice, and press O to open that menu.
DRAFT
- REVIEW
ONLY
