Shure Incorporated
11/33
Connectors are (from left to right): 6-pin battery sled power input, two TA3 audio outputs, and Hirose 4-pin power in-
put.
Connecting a Power Supply
Connect a compatible power supply to the power input.
Battery Sled
The battery sled must be used with the standalone rear panel, as this panel includes the 6-pin connector required for the two
components to mate and pass power. The battery sled is then secured to the receiver using one screw on the rear of the sled,
which ensures that the sled cannot fall off or be removed, and two screws from the front panel to stabilize the sled while on the
receiver.
Insert the battery so that the contact points on the front face connect with the contacts at the rear of the battery sled bay until
the latch moves into place. To remove the battery, push the latch down and pull the battery back and up.
DRAFT
- REVIEW
ONLY
