Shure Incorporated
22/33
◦
◦
•
•
•
•
•
•
You can individually control the gain and audio output in real time for each channel.
Gain: Adjust the gain in 1dB increments while performing a sound check using typical audio input signal levels and monitor
the audio meter LEDs. Reduce the gain if the red LED triggers repeatedly.
Output: Select On or Mute for the receiver audio output.
Tone Generator
Provides a continuous audio signal tone for testing and troubleshooting. Use the arrow buttons to select a level and fre
quency for the tone, and set the level to Off to stop the generator.
Radio
Set a group, channel, and frequency.
RF Level
See finer-resolution details about the RF.
Channel Name
Assigning unique names to each channel helps with identification and organization when the receiver is part of a large system.
Use the arrow keys to assign or edit the channel name.
Channel Scan
Finds available channels within the selected group:
Find Next: Selects the nearest available channel
Find Best: Selects the channels with the best RF noise floor
Group Scan
Scans the selected group to find all available channels.
Spectrum Scan
Choose to perform a scan or recall a previously saved scan, if one is available.
Tx Slots
View and configure transmitter properties. Press O to select a slot and see further actions for that slot.
Indicates a ShowLink capable transmitter
ShowLink status (ShowLink transmitters only)
RF status. If the icon appears, RF output is on (ShowLink transmitters only)
Battery information (ShowLink transmitters only)
Sync
Assign a transmitter to the selected slot.
Unlink
Remove a transmitter from the selected slot.
Flash (ADX transmitters linked to ShowLink access point)
DRAFT
- REVIEW
ONLY
