background image

Shure Incorporated

11/16

1.

2.

3.

4.

DIP Switch Settings

Use the DIP switches to configure logic settings and mute button behavior. DIP switches are down by default, and settings can 

only be changed when the device is powered off. Changes take effect when the mute button is powered back on.

DOWN (default)

UP

1

Toggle

Momentary

2

Push-to-Mute

Push-to-Talk

3

Local Mute

Logic Control

4

Green LED = talk, Red LED = mute

Red LED = talk, Green 

LED = mute

5 and 6 work together to make 4 touch 

sensitivity settings: 1 (lowest) - 4 (highest)

5 UP, 6 DOWN = 1

5 DOWN, 6 DOWN = 2 (default)

5 DOWN, 6 UP = 3

5 UP, 6 UP = 4

Note: 

Higher sensitivity settings are more likely to cause accidental touch responses.

Connecting to a Logic-Enabled Device

Use these settings if connecting the microphone to a logic-enabled device, such as the ANI4IN-BLOCK or ANI22-BLOCK:

Connect the A400MB LED (input) to the ANI LED (output) to illuminate the microphone LED when the logic signal 

changes.

*

Connect the A400MB switch (output) to the ANI switch (input) to send a logic signal from the A400MB to the ANI.

*

Set DIP switch 3 to up. This disables local muting. Pressing the A400MB sends a logic signal (the microphone passes 

audio regardless of whether the button is pressed or not).

Set DIP switches 1 and 2 to configure how the A400MB sends SWITCH OUT logic.

Содержание A400MB

















Отзывы: